What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 21.06.2025 00:27

Upvotes:
Here is a simplified AC power diagram.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
How much stronger is an average man than an average woman?
2024–10–10[John johnson John Johnson ]
I post the exact comment here.
This is where this question deviates from being a 'generic' question, and becomes more specific.
He said he loves me, but why is it difficult for him to leave his wife?
Can the fuse protect the electronic devices from lightning instead of a surge protector.
First Sentence:
There are two important concepts here.
A fuse is a non-resetable over current circuit protector.
Because the load is inductive, the current lags the voltage.(by a bit).
For this case there are devices called Metal oxide varistors (MOV).
Minecraft's "Vibrant Visuals" update finally has a release date - Eurogamer
the problem then depends on "how fast does the fuse operate?".
Edit 2024–10.
2024–10–16 [ OO OLAOYE OYEBODE ]
What is the most overrated pleasure? Why?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
This is 'the assistant's answer'
These are simplified answers to the original question, and does not change anything I wrote above.
What is your craziest/worst Halloween story?
a photo is worth a thousand words.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
A circuit breaker is similar, but is resettable.
Which scene is considered the most difficult to watch in each of Quentin Tarantino's movies?
The third is lightning and “how it gets conducted into a home.”
[old diagram got deleted by accident]
This device then solves the entire problem.
When do you start "growing old"?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Now when you have a certain ac resistance, then a current flows in a loop.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Why do people think Justin Bieber is worse than Joseph Stalin?
The other is “what does a “fuse” do?”
An AC voltage/ current source, and an ac inductive load.
At least they know the answer if they wanted it.
What does it mean when we dream about demons, ghosts, monsters, etc.?
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
In schematic diagrams this is the symbol for a fuse:
Can shaving hair by Veet in our vagina cause diseases?
He then describes the function of a fuse.
Barnstars:
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Who is the dumbest law enforcement officer you have ever encountered?
But it can get overloaded, and no longer works.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
This one hit behind the barn.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
One
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
It also is a device that limits the change in current flow.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
[image of Common-mode choke]
So, the voltage could go up to 500 volts, and the fuse will not open up.
but I think this circuit , shows a few more pieces.
He then asserts :
but this device (an Inductor) … impedes the rapid changes in the current.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
It seems Mohan does not understand the difference between a comment and an Answer.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
What is lightning?
But… the neutral is now “floating” because of the 1 ohm resistance.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This is the picture of an electronic coil of wire wound around a core of magnetic material.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
what exactly is a ‘surge’ protector?
This is where the MOV conducts again, and dissipated the energy.
nine
At one ohm, the resistor has a maximum of 1 watt power.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
eight
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
One is “what exactly is in a ‘surge protector’ ? ”
(Dc diagram shown, AC is similar).
so, what happens?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
The bolt then partially travels down the line to your home.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
There are three different concepts here that are getting confused.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
What does a fuse do?
The MOV will conduct when the voltage exceeds 50% of line voltage.
He then describes Rainy Season and Lightning.